G2 Automated Technologies, LLC. carriers a
complete line of wafer handling equipment
that is fast, clean reliable, and accurate.
Our automatic mass transfer systems can be
customized for a variety of both quartz,
plastic, and silicon
The engineering staff at G2 Automated
Technologies, LLC. has over 20 years
experience in the specific field of WAFER
HANDLING & AUTOMATION. We pride
ourselves in problem solving and helping our
customers find solutions to issues they may
have in there manufacturing process.
What Sets Us Apart
Our business "IS" wafer handling, not just a
way for us to gain investment monies
by show & tell. We work hard at
producing a quality product at a fair price.
We stand behind our products along with
supporting our customers no matter what the
cost. We believe that's what sets us
apart from our direct competition.
System Standard Features:
1. Exclusively Pneumatic
* The Liberty Elite
Pneumatic Systems are 100% air logic
controlled using technology developed over
the last 20 years. These machines are
safe, reliable, and well accepted in the
2. Preserved Flat Alignment
* Our systems
completely preserve flat orientation during
3. Cassette/Boat Presence Sensors
* Our systems are
built with sensors built into the
platform/stage to prevent the machine from
operating unless the correct cassette/boat
is loaded properly for the wafer transfer
system to sequence and proper orientation of
the boats as well.
4. Edge Exclusion -Minimal Wafer
* Our wafer
transfer lifts systems require minimal wafer
edge contact during the transfer procedure.
5. Safety Return Sensors
* The safety return
sensors are a built in safety device that
will help prevent a dangerous environment.
If the pick up combs should encounter any
resistance, the lift system will stop and
return to the bottom home position.
These sensors perform the same function as
the stop button.
6. Auto Pusher
* If required, the
auto pusher ensures proper cassette/boat
referencing for proper pickup of wafers by
the lift system.
7. Exhaust Port
* Optional hookup
allows internal exhaust and particles to be
evacuated from the system for a super clean
8. Save Your Realestate
* G2 wafer transfer
systems are designed to requie minimal
amount of clean-room space.
1. Electronically Controlled Machines
* A PLC is a
device, which can be programmed to perform a
series of sequence of events. These
events are triggered by electrical inputs
received at the PLC or through delayed
actions such as time delays or counted
occurrences. Once an event has been
triggered, it is actuated in the system by
switching ON or OFF electronic controls or
devices. PLC's are very reliable and
widely used for system automation.
2. Stage Platform Reflective Sensor
* This sensor
detects wafer presence within a
cassette/boat and will inhibit the machine
from operating if no wafers are detected in
the sending cassette/boat. Also if
during unload operation if no wafers are
detected in the sending cassette/boat.
Also, if during unloading of wafers from the
retainers/holders, wafers are detected in
the receiving cassette/boat the system will
stop until the wafers are removed.
3. Retainer Thru-Beam Sensor
* This sensor
detects wafers within the retainer assembly.
If during a unload wafers from the boat,
wafers are detected in the
retainers/holders, the system will stop
until wafers are removed from the
4. Optical / Electric Sensors
* These are the
newest in sensor technology that detect
wafer presence, and are also used to ramp
5. Ramped Speed Control
* The ramped speed
control provides gentle pick-up and landing
of wafers from the retainers/holders and
6. Pause Function
* When pressed,
lift system movement (up/down) will pause.
This allows easy maintenance and observation
of the system.
7. Flat Panel Display
* Controls and
graphics operate from touch panel display
eliminating standard start/stop buttons.
Also allows all machine maintenance to be
performed through display.
Thank you for taking the time to visit the
WAFER HANDLING section of our website.
In this section you will find a complete
listing of our manual & automatic wafer
Here To Request A Quote...
Need a budgetary quotation? Please
don't hesitate to contact G2. We
have never claimed to be the cheapest,
however our tools are the most reliable
& accurate tools on the market.
With a warranty like no other.
1. Stainless Steel Wafer Transfer
System W/ Recessed Mounting
2. Vespel Package (High-Temperature
3. Stainless Steel Skins/Covers
4. Hot Boat Sensor & Lock Out Function
5. Communications Package
1. Ultem -Standard
4. ESD - SEMITRON 410
7. TEFLON COATED INTERNAL PARTS
Note: If there is a specific material
you would prefer we use, PLEASE just let us
know and we will work within your
We understand that in many cases upper
management are visual people. They
need to see it work first. If we have
a video of a product you are interested in
seeing, please contact us so we can upload a
video link for your review. We post
these videos under a private link and only
keep them posted for a limited time.
If there is a system we do not have a video
of, we will offer a 30 day money back
guarantee. Basically you place a
purchase order for the product you feel you
need and if it does not do what we say it
will do then simply send it back with in the
30 day period for a full refund.
Please email your request to :
G2 Automated Technologies, LLC.
10500 Metric Dr Bldg 122
Dallas, Texas 75243